Automatic Case Packing System

A complete automatic case packing system has three components: A. the case erector B. the case packer and C. the case closer/sealer. The case erector opens and bottom seals a regular slotted case or tray, the case packer picks and places the containers into the erected box or tray, the case closer takes control of the minor and major flaps of the box and then shuts and seals the box prior to discharging it downstream. This type of system can cost as much or more as the upstream bottling line feeding it. Alternatively, there are less expensive ways to mix some of this machinery with labor component in order to advance output without a large capital cost or with too much labor on the back end.

 


Cap Inspection – Container Rejection System

 
FOF pump-centrifugal

Case Erector

FOF pump-centrifugal

Case Packer

FOF pump-centrifugal

Case Closer/Sealer


 

 

Case Erector Standard Features:

 

FOFNT-48-FILLING-MACHINE

    • Magazine capacity: approximately 80-100 C flute cases (qty. tbd upon receipt of samples)
    • Positive vacuum 2-side case erection
    • Speeds up to 18 cases per minute*
    • Omron Programmable Controller
    • Rugged Construction – 2 ½ Square Tube Welded Frame (.188 wall)
    • Mild Steel Construction with Steelit anti-corrosion paint
    • Dekka 2 Tape Head XL
    • Full guarding w/clear Plexiglass c/w safety interlocks
    • Solid state sensing devices
    • Option: Hot Melt Applicator
 

Utilities and Space Requirements

Utilities:Electrical: 220/3/60 / Air 80 PSI 7 CFM


 

 

Case Packer Standard Features:

 

FOFNT-48-FILLING-MACHINE

    • Omron Programmable Controller
    • Solid state epoxy filled sensing devices
    • Pack up to 10 cycles / min*
    • Pick Up Head Mechanism Frequency Drive Controlled
    • Pneumatic Channelizer (lane dividing)
    • Plexiglass Safety Guarding C/W Safety Interlocks
    • Intralox Poly Pro Flush Grid Table Top Chain
    • Product conveyor Infeed Height 34
    • Case conveyor In-feed height 24
    • Mild Steel Construction Steelit anti-corrosion paint
 

Utilities and Space Requirements

Utilities:Electrical: 220/3/60 / Air80 PSI 7 CFM


 

 

Case Closer/Taper Standard Features:

 

FOFNT-48-FILLING-MACHINE

    • Fully Automatic Top Flap Handling
    • Up to 20 cases per minute*
    • External No-Tool Case Size Adjustment (Quick 2-Hand Crank Adjustments For Different
    • Width and Height Cartons
    • Self Adjusting Rear Flap Tucker For Different Length Cartons
    • Tape Head: Dekka 22 Stainless
    • Single Gear / Drive Positive Gripping Side Belts
    • Mild Steel Construction; Steelit Paint
    • Fully Guarded (two side access door) – Interlocks
    • Rugged Construction: 2 ¼ Tubular Welded Frame
    • State Of The Art Electronic Components
 
 
 

Utilities and Space Requirements

Utilities:Electrical: 220/3/60 / Air 80 PSI 7 CFM


 
 

Share this page

More...