CAP INSPECTION SYSTEMS

 

FOFNT-48-FILLING-MACHINE

LOW SPEED CAP INSPECTION

Automatic bottle in place photo-optic and the cap inspection optic examines each capped container to detect presence of cap on bottle and that the cap is below plane of inspection. Caps that are above plane (“cocked” or untightened caps) and bottles without caps are rejected by an air actuated arm onto stationary tables mounted to each side of the conveyor. Note: Accumulation tables are available at additional cost.

 

Utilities and Space Requirements

Electric: 110 VAC / 3 Amps Air: 1 cfm @

 
 


FOFNT-48-FILLING-MACHINE

HIGH SPEED CAP INSPECTION

Automatic bottle in place photo-optic and the cap inspection camera examines each capped container to detect presence of cap on bottle and that the cap is within tolerance of a programmable inspection criteria. Vision systems identifies caps that are cross-threaded (“cocked” ), bottles without caps, caps that are loose or not torqued down and other criteria detectable by camera. Non conforming containers are rejected by high speed multiple air actuated fingers onto a moving collection turntable.

 

Utilities and Space Requirements

Electric: 110 VAC / 3 Amps Air: 1 cfm @

 
 
 


Important Cap Inspection Systems Options:

 
FOF pump-centrifugal

Foil-in-place detector sensor

FOF pump-centrifugal

Low Speed Collection Tray

FOF pump-centrifugal

High Speed Collection Table

 
 


Metal Detection Systems

 

FOFNT-48-FILLING-MACHINE

Unit detects metal contamination in packaged and loose products on a moving conveyor line. Output signal from the metal detector can be used to reject the contaminated product. Inline Filling Systems also manufactures the metal free conveyor sections as well as an integrated reject station for use with this metal detector.

Features:

      • Programmable digital electronics
      • Fast action automatic balance control
      • Automatic performance monitoring
      • Security code restricts access and prevents tampering
      • Detection signals are indicated on a 30-segment green/red led bar graph indicator
      • Microprocessor includes a comprehensive set of adjustable timers
      • Standard opening of 175 mm x 250 mm (7″ x 10″ H); other sizes available
 
 
Important Metal Detection Options:
 
collection table

High Speed Collection Table

FOF pump-centrifugal

Metal Free Conveyor Sections

FOF pump-centrifugal

Low Speed Collection Tray

 
 


Bottle Checkweigher
 

bottle check weigher

Unit continuously verifies that target container weights are within tolerances. Out of weight containers may be rejected, alarm may sound, or a line shutdown can be initiated. These checkweighers can also be integrated for upstream communication with servo controlled filling machines in order to provide continuous feedback and realtime adjustment of filling parameters.

Features:

      • Two Photoelectric Sensors
      • Stainless Steel and “Hard Coat” Anodized Aluminum Construction
      • 18″ Wide x 30″ Long Powered Weigh Conveyor
      • Four Point Load Cell weighing Technology
      • Continuous Food Grade Belt Conveying Medium
      • 18″ wide x 30″ long out feed belt conveyor
 
 

Share this page

More...