FILLING MACHINE
Overflow Fillers
Servo Pump Fillers
Peristaltic Fillers
Time Gravity Fillers
Piston Fillers
Net Weigh Fillers
Pail Fillers
Drum & Tote Fillers
Hazardous Location

Corrosion Resistant
Filler Selection Chart
BOTTLED WATER
CAPPING MACHINES
Automatic Cappers
Automatic Inline
Automatic Chuck
Auto Snap Capper
Auto Crimp Capper
Auto Cap Placers
Auto Cap Tighteners
Hazardous Location
Corrosion Resistant
Semi-Automatic Cappers
Handheld Capper

Benchtop Capper
Tabletop Capper
Semi Auto Benchtop
Semi Auto Snap Capper
Semi Auto Plugger Corker
Special Filling & Capping Apps
Cap Inspection

Pluggers
Monoblock Systems
LABELING MACHINES
Automatic Labelers
Wrap Labeler
Front & Back
Print & Apply

Shrink Sleeve Labeler
Stretch Sleeve Labeler
Semi-Automatic Labelers
Semi Auto Wrap Labeler
Semi Auto Tamp Labeler
CONVEYORS
TURNTABLES
HAZARDOUS LOCATION
SAFETY GUARDING
BOTTLE GATING SYSTEMS
BULK BOTTLE HANDLING
Bulk Bottle Unscramblers
Bi-Directional Tables

Accumulation Tables
BOTTLE CLEANERS
Air Rinser
Water Rinser
Nitrogen Purge
CLEAN-IN-PLACE (CIP)
TANKS
TRANSFER PUMPS
CODERS
Inkjet
Bottom Coder
Hot Stamp
Laser
CAP SEALING
Induction Sealers
Neckbanders
ADDITIONAL EQUIPMENT
Lidders
Liquid Nitrogen Dosers
Metal Detectors
Checkweighers
Shrink Bundlers
Case packers
Case Erectors
Case Tapers
Water Treatment
Utility Distribution
CUSTOM ENGINEERING
SPARE PARTS
By Part Number
By Part Description
By Assembly
FINANCING
Contact Us
 Phone: 941.486.8800
 216 Seaboard Avenue,
 Venice Florida, 34285

Shrink Sleeve Labelers and Neck Banders

Bander applies shrinkable sleeve material to necks or full body of containers at banding speeds up to 100 cpm. Recirculating heat tunnel shrinks bands onto container necks.
About shrink banders : Shrink sleeve applicators and heat tunnels are used both for applying a tamper evident band around the top of a container or a full or partial shrink sleeve with graphics used as a label.  Tamper bands around the top of the container and cap are used not only for tamper evidency but also to conceal variations in fill heights of products that normally occur in glass bottles. A shrink band system consists of both the applicator and a heat source. A heat tunnel is often necessary to achieve consistent appearance of the shrink.

EZ 100 Shrink Sleeve Bander - Standard Features

-floor stand mounted and can be height adjusted from 36" to 52".
-Sleeve material layflat range: 15 to 110 mm with sleeve material thickness of 40 to 200 microns.
Cap size range to 69mm.
Options:
-Print registration,
-Vertical or horizontal or T-Style perforation,
-Low film warning,
-NEMA 4 electrical enclosure.,
-Heat shrink tunnels,
-No band detect/reject,

Utilities and Space Requirements:  (Bander)


Utilities: Electric:110 VAC /1/ 4 Amps  Air 3 cfm @ 80 psi

Dimensions:
 40" L x 47" W x 74" H

Click Here for Outline Drawing of Frame Size

EZ 36BR  Heat Tunnel - Standard Features

-Heated tunnel distance: 36"
-Heating zone: 230v operating at 32 amperes
-Curtained tunnel opening dimensions: 7.5" W x 6.75" H.
-Single temperature controller.
-Unit is mounted on a floor stand with hand crank for adjustable height from 36" to 52".
Options:
-Electric height adjustment,
-Automatic lifts,
-Three phase configuration,
-Temperature alarm.

Utilities and Space Requirements:  (Heat Tunnel)


Utilities: Electric:230 VAC /1/ 32 Amps

Dimensions:
 36" L x 36" W x 76" H

Click Here for Outline Drawing of Frame Size