Turntables are used not only for empty and full bottle
management in filling lines but also for accumulation of many types of products in a host
of packaging and manufacturing systems.
All Stainless Steel Tubular construction.
-Standard speed setting is 0 to 7 rpm or 82.5 feet/min.
-Variable speed, sealed, fused/surge protected DC motor w/ 550 inch/lbs
-Turntable glides on rubber, self lubricating bearings for quiet
-Turntable height is 35" adjustable to 40".
-Foot pads are fully articulating and vibration resistant.
-Base cabinet is offered either open frame or fully enclosed stainless
steel with gasketed, hinged access door and compression latches.
-Unique floating bearing removes downward thrust on drive armature to
ensure long life
Inline Filling Systems builds
standard turntables and also custom turnables in many sizes and contact
materials. Typical turntables sizes are 24", 36", 45" and 60" diameter.
Turntable surface tops are offered in all grades of stainless steel,
UHMW and other plastics, and molded plexiglass for parabolic shapes.
Special corrosion proof turntables are offered in fiberglass and UHMW
Turntables with Integral Pack
Stainless Pack on and Pack off tables
are offered built into the turntable frames. (45" diam. unscrambler with
pack on shown.)
Large Diameter Turntables
60" Diameter turntables are
offered in open frame or closed with optional NEMA4 controls. (60" diam.
unscrambler used in bottled water line shown.)
Small Diameter Turntables
Very small turntables complete
with pack on/pack off tables can be custom made for any application (21"
diam. accumulator with pack off shown.)
Plastic Disc Tops
Poly and UHMW turntable tops
are offered to overcome problems in corrosive environments or where
stainless tops would cause scuffing to the product.
Fiberglass and UHMW
Fiberglass and UHMW
are offered to overcome premature degradation of the machinery in corrosive environments.
Bottle Orienting Systems
Rectangular, oval, or
otherwise difficult to handle bottle shapes are managed by custom bottle
orienting systems. (Ovals being unscrambled and fed into conveyor
Technically, these 18"
diameter turntables do not accumulate or or unscramble. Rather, they are
used to power the transfer of containers across conveyors that abut each
other at 90 degrees.
Utilities and Space Requirements:
Electric: 110/220 VAC /1/ 20 Amps
x 24"W base footprint adjustable to 40"H (custom heights available)