This 8 to 16 head fiberglass and plastic construction filling machine is designed to provide the ultimate level of corrosion protection and performance for the corrosive chemical industry. This automatic filler is best suited for water and very thin liquids whose viscosity does not change with ambient temperature or with batch variation. Especially suited for applications where recirculation of the product is not possible or desired.
Model FTGNT 8-16 CR Automatic High Performance Time Gravity Filler
- Filler frame constructed of non-metallic parts.
- Pneumatic operated nozzles – listed separately.
- Nozzle timing protocol is PLC controlled for high accuracy fills.
- Automatic plastic drip tray.
- Automatic supply regulation.
- Manual bottle height adjustment.
- Automatic drain and clean cycle.
- Batch bottle counter.
- Control panel uses a color touchscreen for simple, intuitive operator controls.
- Intelligent Automation features:
- No bottle/no fill.
- Downstream backup/no fill (suspend operation).
Exclusive Features:
Bottom Up Fill Capability
This filler comes standard with a diving nozzle rack that can lower the nozzle to the bottom of the container when the fill cycle starts. By filling with the nozzle at or underneath the liquid, foam generation on difficult products is virtually eliminated.
Watch How Bottom Up Fill Works
Clean-in-Place Capability
The FTGHP filler models comes prewired with programming included for adding CIP capability in the future. (Additional fluid path hardware, tanks, and pump systems are additional cost).Clean In Place Capability
Valve Selections
Valves are offered for food grade, chemical, and bottom-up-fill applications. Your applications engineer will recommend the best pump for your range of product.
Ball Valve
Available in a variety of chemical resistant materials.
Diaphragm Valve
Used for very precise fill volumes for chemical applications
[one_third_last]
Internal Shutoff Valve
Used for sanitary and bottom-up-fill applications
[/one_third_last]
Nozzle Tip Selections
Nozzle tips are available in a wide selection of design, sizes and construction materials based on the specific application. Those shown below are only a small sample of our designs. Your applications engineer will recommend the best nozzle for your range of products.
[one_fourth]
Internal Shutoff
[/one_fourth][one_fourth]
External Shutoff
[/one_fourth][one_fourth]
Swaged Internal
[/one_fourth][one_fourth_last]
Showerhead
[/one_fourth_last]
Tank Options
Inline Filling Systems has designed and manufactured many standard and specialty tanks ideally suited to your specific application.
Sanitary Stainless
For a wide range of FDA and USDA regulated products.
Chem Duty Polypropelene
For a wide range of industrial chemical applications.
[one_third_last]
Hot WaterJacketed
Closed-Loop, self-contained systems for hot fill applications
[/one_third_last]
Time Gravity Specialty Applications:
Time gravity filling technology is ideally suited to some applications suggested below. Inline Filling Systems has over a decade of applications and engineering experience in all of these areas.
Corrosive Products Filler
Middle Photo: Rubber coated, corrosion resistant frame.
Right photo: Kynar valves for bleach filling machine.
[one_third_last]
[/one_third_last]
Hazardous Location
Middle Photo: 5 gallon filler for filling 70% ethanol based flavorings.
Right photo: intrinsically safe Class 1 D 1 controls.
[one_third_last]
[/one_third_last]
Net Weight Filler
Middle Photo: Net weigh filling machine for high value enzymes.
Right photo: individual scales for each container.
[one_third_last]
[/one_third_last]
Utilities and Space Requirements
Dimensions: 72″ L x 48″ W x 85IN H
Utility requirements:
Electric: 110 VAC / 5 Amps
Air: 27 cfm @ 80 psi